Stanley D. Pulz. CSP, P.E.
Mr. Pulz is a Registered Professional Engineer (Safety), Certified Safety Professional, and master's level psychologist specializing in technical aspects of applied human factors engineering and safety. For over 25 years, both as a corporate safety director and private consultant, Mr. Pulz has provided a variety of organizations, including private industry, governmental organizations, and the legal and insurance community, with technical assistance on safety and human factors engineering issues. In addition, Mr. Pulz serves as a member of numerous national consensus standards committees including: ASTM Committee No. E-34 on Occupational Health and Safety; ASTM Subcommittee E34.85 on Ergonomics; ANSI A-10 Committee on Safety Requirements for Construction and Demolition; ANSI A-10.2 Subcommittee on Standards for Safety, Health, and Environmental Training; and is chairperson for the ANSI A-10.39 Subcommittee on Safety Audit Procedures. As an accredited Occupational Safety and Health Instructor through the U.S. Department of Labor (OSHA), Mr. Pulz has taught accredited OSHA safety courses through The National Resource Center for OSHA Training under a grant from the U.S. Department of Labor. In addition, Mr. Pulz has been an instructor on human factors and safety at Community College of Baltimore County, Catonsville, Maryland and on numerous safety topics for the National Safety Council and the Safety Council of Maryland.
Mr. Pulz established SPA inc. as a Maryland closed corporation in 1981. The objective of SPA inc. is to provide research analysis and consultative services in the areas of safety, human factors engineering, and risk management to private industry, insurance and legal communities, government, and trade organizations. These services have included, but are not limited to, analysis of facilities, products, operations, and equipment; programs to detect programmatic, physical or environmental hazards/failures, coupled with recommendations of needed solutions/methods to mitigate or eliminate hazardous and/or high-risk conditions and/or lower insurance and worker compensation costs; and seminar development and production.
Examples of SPA inc.'s joint venture and teaming projects include: conducted OSHA standards surveys/inspections at National Aeronautics and Space Administration (NASA) field installations; researched and developed injury and illness prevention program for Texaco Exploration and Production, Inc., California Operations; and safety management seminars with mid- and upper-level management for the Health Care Facilities Administration (HCFA). SPA inc. has also developed corporate safety and health programs and provided safety training nationally to Maersk Container Service Company, Inc. and member companies of the Washington D.C. chapter of the National Electrical Contractors Association. In addition, SPA inc.'s technical consultations have been utilized by the insurance and legal communities for expert testimony, pretrial, and trial preparation in cases involving product safety analysis, hazard analysis, hazard warning analysis, failure analysis, and human factors engineering analysis with respect to private, product, commercial, and industrial accident reconstruction.
- Radford University Graduate School, Radford, Virginia
- M.A., Psychology, 1976 (emphasis in Human Factors)
- Johns Hopkins University, Baltimore, Maryland
- Graduate Studies, Psychology, 1975
- Concord College, Athens, West Virginia
- B.A., Psychology, 1973
- The Community College of Baltimore County, Catonsville, Maryland
- Certificate, Occupational Safety and Health Technology, 1988
PRESIDENT AND PRINCIPAL CONSULTANT, SPA Inc., Baltimore, MD, 1979 - Present
Responsible for general management duties associated with private consulting practice. Provided consulting services to employers, employer associations, government agencies, and the insurance and legal communities on safety, health, human factors engineering and risk management issues. These services include but are not limited to:
- technical aspects of federal, state, industrial, consensus, commercial, product, and trade safety and health regulations/standards
- general and industry-specific safety and health audits
- safety and health program development, evaluation, and administration
- hazard recognition, analysis, and control
- forensic engineering and failure analysis
- training seminar development and production
SAFETY/HUMAN FACTORS ENGINEER, Logistics Mgt. Engineering, Inc., Annapolis, MD, 1978
Responsible for development of marketing program for consulting services in safety and human factors engineering.
CORPORATE SAFETY DIRECTOR, John T. Clark & Son of MD, Inc., Baltimore, MD, 1975 - 1979
- Developed and implemented safety program, investigated accidents associated with the materials handling and maritime industry, record keeping, medical programs, training, insurance materials, correspondence with federal and state regulatory agencies, research and development of operations safety
- Corporate safety program chosen by the National Maritime Safety Association as reference for their national safety program published in 1978. Trained executive personnel from national trade association in effective safety programming
- Created accident reporting system, established effective communication between management personnel and insurance carriers. Resulted in achievement awards for safety efficiency from local trade association in 1976, 1977, and 1978
- Registered Professional Engineer, Safety Engineering, Massachusetts
- Certified Safety Professional
- Certified Hazard Control Manager
- Certified Product Safety Manager
- Certified Occupational Health and Safety Technician
- WSO - Certified Safety Executive, World Safety Organization
- WSO - Certified Safety, Health, and Environmental Ergonomist
- Authorized Occupational Safety and Health Trainer, OSHA, U.S. Department of Labor
- American Society of Safety Engineers
- American Psychological Association
- Human Factors and Ergonomics Society
- National Society of Professional Engineers
- Maryland Society of Professional Engineers
- World Safety Organization
- Systems Safety Society
- Member, ANSI A.10 - Committee on Safety Requirements for Construction and Demolition
- Chairman, ANSI A.10.39 - Subcommittee on Construction Safety and Health Audit Programs
- Member, ANSI A10.1 - Planning for Construction Safety and Health
- Member, ANSI A-10.2 - Subcommittee on Standard for Safety, Health, and Environmental Training
- ANSI A10 Liaison to A10.23 Safety Requirements for the Installation of Drilled Shafts
- Member, ANSI A10.34 - Confined Spaces in Construction
- Member, ANSI A-10.40 - Reduction of Musculoskeletal Problems in Construction
- Member, ANSI A10.41 - Equipment Operator and Supervisor Qualifications and Responsibilities
- Member, ANSI A10.42-2000 Safety Requirements for Rigging Qualifications and Responsibilities
- Member, ASTM Committee No. E.34 - Committee on Occupational Health and Safety
- Member, ASTM Committee No. E.34.30 - Committee on Occupational Health and Safety in Construction
- Member, ASTM Subcommittee E34.85 - Ergonomics Public
- Member of the Board of Trustees, Electrical Local 26 Joint Apprenticeship and Training Trust Fund, Washington, D.C.
- S.D. Pulz: "Research on Modern Psychology as Applied to Longshore Safety," National Safety Council, 1978.
- S.D. Pulz: "Accident Analysis for Prevention: The Role of the Human Factors Specialist in Accident Reconstruction," Professional Safety, February, 1987.
Last Updated: 2/2012