Case Description/Summary: A construction worker was injured when he was struck by a piece of cinder block from above. Workers from a second company were removing cinder blocks from a pallet that was lying on the floor of the work area above but still attached to a forklift when the piece of cinder block… Read more »
Accident Analysis Due to Defective Industrial Product
Case Description/Summary: An employee was installing acoustical ceiling tile while using a set of stilts to reach the ceiling. The right stilt broke, causing the employee to fall. The employee was injured because of the fall. Expert Analysis/Summary: A construction safety analysis included a review of all relevant depositions and other discovery documents, reports,… Read more »
Electrocution Accident Analysis
Case Description/Summary: An employee was working in an uninsulated bucket truck installing new coax span cable between two utility poles in a residential community. The coax span cable was positioned below two power lines. The top line primary power line possessed 19,000 volts and the bottom secondary line possessed 120 volts. While using the… Read more »
Doorway Trip and Fall Accident Analysis
Case Description/Summary: A patron at a hotel bar and/lounge was allegedly injured when her shoe became stuck in the metal threshold of an exterior door while entering the building. Expert Analysis/Summary: A human factors and safety analysis included a review of all relevant depositions and other discovery documents, reports, photographs, etc. In addition, a… Read more »
Forklift Accident Analysis
Case Description/Summary: A truck driver of a flatbed truck made a delivery of two bundles of cold rolled steel bars. There was a total of 18 bars of steel, nine bars per banded steel bundle. The steel was two-inches by five-inches and 12-feet long. The edges of the steel were reported to be pointed… Read more »
Multi-employer Worksite Safety Issues 2
Case Description/Summary: An independent contractor working at a construction project was injured when a scaffold plank became dislodged from the tubular scaffold he was working from causing him to fall approximately six (6) feet (+) to the ground below. Just prior to the subject accident event, another company working on the project was allegedly… Read more »
Multi-employer Worksite Safety Issues
Case Description/Summary: Maintenance worker was injured while welding when he was struck by a steel work rest originally lying between steel rollers on a steel mill. The maintenance worker was an independent contractor working for a specialty contractor associated with the maintenance and repairs of steel mill facilities and other manufacturing or processing facilities. Expert… Read more »